Beckhoff AX2500 Series, Сборка, установка, настройка

Страница: 53 / 81

4.9.2
Connection to incremental encoder master with 24V signal level (X3)
You can use this interface to set up the AX2500 as a slave following an encoder with a
24V signal level (master-slave operation). This application uses the digital inputs DIGI-
TAL-IN 1 and 2 on connector X3.
Limit frequency: 100 kHz, transition speed tv
£
0.1µsec
AGND (terminal X3/1) must be connected to the ground of the control system!
4.9.3
Connection to a sine-cosine encoder master (X2)
You can use this interface to set up the AX2500 as a slave following a sine/ cosine enco-
der (master-slave operation). This application uses the SubD connector X2.
Limit frequency: 350 kHz
AGND (terminal X3/1) must be connected to the ground of the control system!
AX2500 Installation Manual 53
Beckhoff
02/06
Interfaces
AX2500
AX2500