Becker Active 43 Series Скачать руководство пользователя страница 82

Страница: 82 / 142

>>>

NAVIGATION MODE

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Map zooming

The map can be zoomed into in steps via
the zoom buttons.

Press zoom in

to “zoom in on the

map” and therefore to get closer to the
details displayed.

Press zoom out

to “zoom out from

the map” and therefore to obtain a larg-
er overview.

Press the

button to switch back to

the set zoom step after a change.

Moving the map

You can move the map to any point.

To do this, press the map briefly.

Then press any point on the map and
move it in the required direction.

The map is then moved accordingly.

You can also select a point as a destination
as described under “Selecting a destina-
tion from the map” on page 58 or block a
road.

Map display options

In the map display options, you can
change the settings for route guidance, the
map display and the route.

On the map display, press the button on
the bottom right.

This opens the options menu for the map
display.
You see the available options in the mid-
dle section.
You can go to the next or previous page of
the options by pressing the

and

buttons.

Note:

The zoom steps are altered in quick suc-
cession by pressing and holding the

button.

Note:

By pressing the

Back to GPS

button you

can display your current position again.

Содержание Active 43 Series















































































































































Результаты поиска

Содержание Active 43 Series

Отзывы:

Похожие инструкции для Active 43 Series

Бренды по названию

Популярные бренды

Becker Active 43 Series, Руководство по эксплуатации

Результаты поиска

Содержание Active 43 Series

Отзывы:

Похожие инструкции для Active 43 Series

Бренды по названию

Популярные бренды