Becker Active 43 Series Скачать руководство пользователя страница 29

Страница: 29 / 142

GENERAL OPERATION

>>>

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Other character sets

Different character sets can be selected for
the keyboard of the Navigation device.

Press the button marked with an arrow
repeatedly until the desired character set
is selected.

Entering numbers

Switch to the numbers keyboard in order
to enter figures.

Press the

button.

The numbers keyboard is displayed.

In order to return again to the keyboard
for entering letters, press the button
marked with an arrow.

Switching between upper and lower case

During free text entry, it is possible to
switch between upper/lower case and the
automatic function.

Press repeatedly on the button in the
top right-hand corner of the display un-
til the desired method of entry is acti-
vated.

The inscription on the button symbolises
the method of entry.
• The

button represents automat-

ic mode. This means that, on entry, the
first letter is automatically in upper case
and subsequently changes automatically
to lower case.

• The

button represents the entry

of upper case letters.

• The

button represents the entry

of lower case letters.

Содержание Active 43 Series















































































































































Результаты поиска

Содержание Active 43 Series

Отзывы:

Похожие инструкции для Active 43 Series

Бренды по названию

Популярные бренды

Becker Active 43 Series, Руководство по эксплуатации

Результаты поиска

Содержание Active 43 Series

Отзывы:

Похожие инструкции для Active 43 Series

Бренды по названию

Популярные бренды