Becker Active 43 Series Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 142

background image

16

>>>

GENERAL OPERATION

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

General operation

Maintenance and care

The unit is maintenance-free.
For proper care, a commercially available
cleansing fluid for electrical devices may
be applied using a soft damp cloth.

Your mobile navigation system was de-
signed and manufactured with great care
and should be treated with equal care. You
will enjoy your mobile navigation system
for a long time to come if you observe the
recommendations listed in the following:
• Protect your mobile navigation unit

and the accessories from water and
moisture. If your unit has been exposed
to moisture, switch it off immediately
and disconnect the power supply. Allow
to dry at room temperature.

• Do not operate your mobile navigation

system in a dusty or dirty environment
and do not store it in such an environ-
ment.

• Do not store your mobile navigation

system in hot environments. High tem-
peratures can shorten the service life of
electronic components in your unit,
damage the rechargeable batteries and
cause certain plastics to warp or melt.

• Do not store your mobile navigation

system in cold environments. During
operation, when the unit warms up to
operating temperature, moisture may
form internally, causing damage to elec-
tronic components.

• Do not drop your mobile navigation

system unit, protect it from shocks and
do not shake it. Improper handling can
damage components within the unit.

• Never use corrosive or aggressive chem-

icals, cleaning solutions or aggressive
detergents for cleaning.

All the above information applies equally
to the mobile navigation system, the re-
chargeable battery, the mains charging
and car power adapters as well as all acces-
sories. Should one of these parts not work
properly, please contact your authorised
dealer.

¤

Danger!

Danger to life by electrocution. Always
switch off the unit and disconnect the
mains power supply unit before clean-
ing the unit, supplied components, or
accessories.

Note:

Do not use any aggressive or abrasive
substances or cloths which may damage
the surface.
The unit must not be exposed to water.

«
...
14
15
16
17
18
...
»

Содержание Active 43 Series















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Active 43 Series

BOLERO40 Series

Бренд: Lantronix Страницы: 37

Бренд: Golf Buddy Страницы: 18

Бренд: Origin Страницы: 17

Бренд: Shenzhen Страницы: 8

Бренд: Flymaster Страницы: 66

Бренд: Garmin Страницы: 38

Бренд: Elmic Страницы: 11

Бренд: Garmin Страницы: 20

Бренд: SuperCELL Страницы: 8

Бренд: Raymarine Страницы: 128

Бренд: II Morrow Страницы: 130

Бренд: InvenSense Страницы: 14

Бренд: Teltonica Страницы: 14

Бренд: Trust Страницы: 7

Бренд: Elari Страницы: 136

Бренд: Continental Refrigerator Страницы: 5

Voxtrack GPS850

Бренд: Voxson Страницы: 26

Бренд: Haicom Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды