GB
READ THESE INSTRUCTIONS CAREFULLY BEFORE
USE AND KEEP THEM FOR FUTURE REFERENCE
YOUR CHILD’S SAFETY MAY BE AFFECTED IF YOU DO NOT FOLLOW THESE INSTRUCTIONS
WARNING:
This pushchair has been designed to be operated as shown in the instructions supplied.
Not to do so may cause damage and render your guarantee void.
1 - TO UNFOLD:
When opening the pushchair with the adjustable handle, ensure that the handle is in line with the main
handle.
2 -
Pull gently on handle of pushchair, and press down on metal tube of pushchair with your foot as indicated by the
figure, until primary locks engage with a click.
NB: Do not rotate handle collar when opening the chassis (fig 2a).
The secondary lock will automatically engage.
3 - STEERING - NON-STEERING:
The front wheels can be used in either mode.
Slide lever (on both sides of chassis) to the upward position for steering, as indicated in the figure.
For non-steering wheels press button and lever will slide in a downward position.
NB:
When using your pushchair on rough ground we recommend non-steering mode.
4 - BRAKE OPERATION:
To apply brake, press down on pedal.
5 -
To release brake, pull up the pedal.
6 - REAR SUSPENSION SYSTEM:
Adjustable in two positions. With brakes applied, use foot to make adjustment.
Release suspension mouldings as showed in the figure for a soft option for the young infant.
7 -
Press down on suspension mouldings, for a strong but comfortable setting for the larger child.
8 - TO REMOVE THE REAR WHEEL:
Press lever downwards and at the same time pull the wheel away from the axel
housing.
9 - TO FIT THE REAR WHEELS:
Place axel in axel housing and press inwards.
Check by pulling wheel to confirm latching of the axel.
10 - TO REMOVE THE FRONT WHEEL:
N.B. The front wheels of this chassis can only be removed if the steering button
is in an upward position.
Press button and at the same time pull the wheel away from the front leg.
11 - TO FIT THE FRONT WHEELS:
N.B. The front wheels of this chassis can only fitted if the steering button is in an
upward position.
Press button and at the same time push wheel housing into front leg, until it locks into position.
Check by pulling wheel to confirm latching of the wheel housing.
12- ADJUSTABLE HANDLE HIGHT: (a)
Press the two buttons simultaneously and rotate the handle bar as required.
(b)
Press the two buttons simultaneously and raise or lower the handle bar as required.
13 - REMOVING ADAPTER:
To convert the tandem version (TWO) to a single version (ONE) pushchair, remove adapter
by pushing in device (A) on both sides of the adapter and simultaneously remove adapter away from chassis frame.
14 - TO FIT ADAPTER:
To convert the single version (ONE) to a tandem version (TWO) pushchair, fit adapter by
hooking metal plate (B) to back metal rivet on chassis on both sides. Then lower adaptor engaging devise (A) into
front metal rivet and lock will automatically engage.
Ensure adapter is secure at all four attachments points (A and B).
15 - TO FIT CARRYCOT:
Place carrycot base on chassis attachment device “easylock”. Lock will automatically engage.
Warning: Check that the pram body attachment devices are correctly engaged before use.
N.B:
In the tandem version (TWO) do not use two carrycots or a single carrycot. Use either a carrycot with
pushchair seat or a carrycot with car seat.
For all possible configurations for the tandem version (TWO) see page 4 and 5.
TO REMOVE CARRYCOT:
Push in button on base of the carrycot and simultaneously lift carrycot away from chassis
frame.
16 - TO FIT SEAT:
Seat may be forward or rear facing. Place seat on chassis attachment devise “easylock”. Lock will
automatically engage.
Warning: Check that the seat unit attachment devices are correctly engaged before use.
N.B:
In the tandem version (TWO) do not use just a single pushchair seat.
TO REMOVE SEAT:
Push in button on both side of seat unit and lift seat away from chassis frame.
17 - TO FIT AUTO SEAT:
Place auto seat on chassis attachment devise “easylock”. Lock will automatically engage.
Warning: Check that the auto seat attachment devices are correctly engaged before use.
N.B:
In the tandem version (TWO) do not use just a single auto seat.
TO REMOVE AUTO SEAT:
Push in button on front of seat unit and lift auto seat away from chassis frame.
Содержание one&two
