BDDF00001 Issue 5
14/56
Alaris™ Syringe Pumps
Getting Started
Getting Started
Initial Set-up
w
Before operating the Pump read this Directions For Use manual carefully.
1 . Check that the Pump is complete, undamaged and that the voltage rating specified on the label is compatible with your AC power
supply .
2 . Items supplied are:
• Alaris Syringe Pump
• User Support CD (Directions For Use)
• AC Power Cable (as requested)
• Protective Packaging
3 . Connect the Pump to the AC power supply for at least 2½ hours to ensure that the internal battery is charged (verify that the
S
is
lit) .
Language Selection
1 . On initial start-up the Pump will display the Select Language screen .
2 . Select the required language from the list displayed using the
f
keys .
3 . Press the
OK
softkey to confirm your selection .
w
• The Pump may be used safely with the pre-installed default data set. Any data set created for installation must be
approved by an appropriately qualified person with clinical authority in accordance with hospital protocol prior
to upload and activation.
• The Pump will automatically operate from its internal battery if the Pump is switched on without being connected
to the AC power supply.
• Should the Pump fail to perform correctly, replace in its original protective packaging, where possible and contact
Qualified Service Personnel for investigation.
