manualshive.com logo in svg

Baumuller BM5-O-SAF-002, Руководство по эксплуатации

Поделиться
Скачать
Baumuller BM5-O-SAF-002 Скачать руководство пользователя страница 18

Intended use

Operation Manual 

Safety Module for b maXX 5000

 BM5-O-SAF-002/3

Document no.: 5.11016.03

Baumüller Nürnberg GmbH

18

of 180

4.3

4.3

Intended use

The Safety Module is exclusively designed and constructed for the intended purpose of 
use described here.

You are using the Safety Module according to the terms, as soon as you regard all notes 
and information in this operation manual.

WARNING!

Danger due to use other than intended!

Any use of the Safety Module different from and/or exceeding beyond the scope of 
the intended use can lead to dangerous situations.

Therefore:

m

Only use the Safety Module as intended.

m

Only use the Safety Module in combination with compatible controllers (see 

Z

Compatibility list

– 

on page 31).

m

Follow all specifications of this operation manual.

m

Ensure that exclusively qualified personnel work on or with the Safety Module.

m

Take care in project planning to see that the Safety Module is always used within 
its specifications.

m

Ensure that the power supply meets the required specifications.

m

Only operate the Safety Module if it is in technically faultless condition.

m

Only use the Safety Module with certificated components or in combination with 
components approved by Baumüller Nürnberg GmbH.

Содержание BM5-O-SAF-002























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды