Baumer CombiFlow PF75H, Руководство по эксплуатации

Страница: 44 / 118

6 Commissioning
In certain countries and regions, inspections are carried
out or authorization obtained before commissioning the
equipment.
The flow sensor can only be operated as a component within an
pipeline system. Observe the operating company’s specifications
and the settings for the overall system, as well as all safety infor-
mation and descriptions within this manual, during commissioning.
n The flow sensor must be installed.
Ä
5.3 “Installation” on page 36
n The flow sensor must be electrically connected.
Ä
5.4 “Electrical connection” on page 39
Before commissioning, all system parameters must be set:
The configuration and operation of the flow sensor
PF75 can be performed via the BCP control software or
the display.
The functions and settings are the same and the two
menus are structured in a similar fashion.
n Entering and checking the system parameters on the display:
Ä 7.1 “Display menu” on page 52
n Entering and checking the system parameters using the BCP
software:
–
The flow sensor is connected to a PC via the USB port.
Ä 6.1 “Create USB interface” on page 44
– The BCP software is installed on the PC with all drivers.
Ä 6.2 “BCP software installation” on page 45
6.1 Create USB interface
Personnel: n Operator
Protective equipment: n Protective work clothing
n Safety boots
DANGER!
Risk of injury when entering the operating space of
the super-ordinate machine and its moving parts
n The flow sensor must be connected to a PC via the USB port in
order to install the BCP software with all drivers.
n The flow sensor must be electrically connected and operated
with operating voltage.
Ä 5.4 “Electrical connection” on page 39
Commissioning
Create USB interface
12.08.2020 CombiFlow PF75H/S 44