2.2 Designated use
The PF75S flow sensor is exclusively intended for use in industrial
working environments.
It can be installed in closed rooms or outdoors underneath a roof.
The PF75H flow sensor is used in the area of hygiene.
Proper application also includes adherence to all information given
in this manual. This relates in particular to adherence to the tech-
nical information.
The flow sensor measures and detects the flow rates of fluids.
This flow sensor complies with the DGRL (Pressure Equipment
Directive PED) and is designed and manufactured as per the state
of the art for media in fluid group 2.
The application range includes conductible fluids with the following
properties:
n
Conductibility ≥ 5 μS/cm
n
Viscosity < 70 mm²/s at 40 °C (< 70 cST at 104 °F)
Components can be assembled differently within a system. Please
note that technical limitations are defined by the limitations of the
weakest component of the system.
2.3 Reasonably foreseeable misuse
Misuse especially includes the following:
n
Any use of the flow sensor beyond the intended use or any
other improper use.
n
Any use of the flow sensor by unqualified or incorrectly quali-
fied personnel.
n
Use of the flow sensor together with accessories not approved
by Baumer.
n
Use of the flow sensor in potentially explosive atmospheres.
2.4 Work areas and danger zones
The work areas and danger zones depend on the layout of the
sensor PF75 of the higher-level production equipment and the pre-
vailing circumstances at the installation site. They must therefore
be determined by the operating company.
DANGER!
Non-observance of operating company's obliga-
tions could result in serious injuries or death.
–
Always ensure adherence to the operating compa-
ny's obligations.
2.7 “Responsibility of the owner” on page 11
Safety and responsibility
Work areas and danger zones
12.08.2020
CombiFlow PF75H/S
10
