Baumer 11233538 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 54

Baumer 11233538 Скачать руководство пользователя страница 4

1

|

About this document

Baumer

4

Operating Manual

OM20/ OM30 RS485 with Modbus RTU | V1

1

About this document

1.1

Purpose

This operating manual (subsequently referred to as the

manual

) allows the safe and efficient

handling of the product OM20/OM30.

The manual does not provide instructions on operating the machine in which the product is inte-
grated. Information on this is found in the operating manual of the machine.

The manual is a constituent part of the product. It must be kept in the immediate vicinity of the
product and must be accessible to personnel at all times.

Personnel must have carefully read and understood this manual before beginning any work.
The basic prerequisite for safe working is compliance with all safety instructions and handling
instructions given in this manual.

In addition, the local occupational health and safety regulations and general safety regulations
apply.

The illustrations in this manual are examples only. Deviations are at the discretion of Baumer at
all times.

1.2

Warnings in this manual

Warnings draw attention to injury or material damage. The warnings in this manual indicate dif-
ferent hazard levels:

Symbol

Warning term

Explanation

DANGER

Indicates an immediate danger with high risk that will lead to death
or serious injury if not avoided.

WARNING

Indicates a possible danger with medium risk that may lead to
death or (serious) injury if not avoided.

CAUTION

Indicates a danger with low risk that could lead to slight or medium
injury if not avoided.

NOTE

Indicates a warning of material damage.

INFO

Indicates practical information and tips that enable optimal use of
the devices.

«
...
2
3
4
5
6
...
»

Содержание 11233538























































Отзывы:

Нет отзывов