Basler BE1-25/79TR, Инструкция по эксплуатации, Страница: 44 / 78

BE1-25/79TR Functional Description
3-17
Review/Edit Settings (Figure 3-13)
This activity screen provides a review and edit of the front panel settings from a remote terminal.
The EDIT SETTINGS password is required (defined in the review/reset maintenance screen) to enter this
screen.
RELAY ID is a special 24 character label entered in the review/reset maintenance screen to identify this
relay from other devices. DATE and TIME are the current date and time as reported from the relay.
The settings on this screen are the same settings that can be set from the front panel of the relay except for
the BAUD RATE - REAR setting which is only settable from this screen.
After making the setting change, the user must press ESC and answer DO YOU WANT TO SAVE NEW
SETTINGS: (Y/N)? with Y before the selection is actually saved and set in the settings table.
RELAY ID: XXXXXXXXXXXXXXXXXXXXXXXX
DATE mm/dd/yy TIME hh:mm:ss
REVIEW / EDIT SETTINGS
FUNCTION EXIST NEW FUNCTION EXIST NEW
MASTER TD 100 nnn SEC PHASE W 20 nnn DEGREES
RST 1 TD 10 nnn SEC DELTA V 1.00 n.nn VOLTS
RST 2 TD 15 nnn SEC F SLIP W 00.25 nn.nn HERTZ
HSR TD 50 nnn CYCLES CLOSE TD 2 nn SEC
LT1 TD 25 nnn SEC HSR-SYNC 0 n 0=N,1=Y
LT2 TD 30 nnn SEC BKR RECG 4 nn x4 MSEC
RP1 TD 35 nnn SEC LOP TD 100 xxx x10 MSEC
RP2 TD 40 nnn SEC YEAR 93 nn
PAR TD 60 nnn SEC MONTH 2 nn
SYNC TD 10 nnn CYCLES DAY 17 nn
PF TD 5 nnn SEC HOUR 45 nn
LO TD 5 nnn SEC MINUTE 30 nn
DEAD BUS 20 nnn VOLTS SECOND 25 nn
DEAD LINE 20 nnn VOLTS START 52B 0 n 0=N, 1=Y
LIVE BUS 70 nnn VOLTS BAUD RATE 19200 nnnnn FRONT
LIVE LINE 70 nnn VOLTS BAUD RATE 19200 nnnnn REAR
LOP TD RANGE = MIN 0 MAX 999 X 10 MSEC 0 = INHIBIT
PRESS 'ESC' TO RETURN TO MAIN MENU
Figure 3-13. Review/Edit Settings Screen