Parameter
Symbol
Description
Input Parameters
Temperature Value
t.v
Measured temperature
Default Temperature
t.def
Default temperature
Temperature Unit
t.unit
Temperature measurement unit
Temperature
Coefficient
t.cor
Temperature compensation coefficient
Temperature
Compensation
t.comp
Temperature compensation method
Temperature Sensor
t.sens
Type of sensor connected to the device temperature input
Conductivity Value
c.v
Measured conductivity
Conductivity Unit
c.unit
Conductivity measurement unit
Point Position
c.pnt
Decimal point position
Filter Band
f.b
Zone around the measured value, within which the filter is active
Filter Time
f.t
Relative time constant of the input filter
Cell Constant
const
Cell constant
Wire Resistance
c.cabr
Resistance of the connection wires
Output Parameters
Output Configuration
o.conf
Analog output signal type
Analog Output Link
o.lnk
Defines input linked to the analog output
Low Limit
o.lo
Input value at low limit of the analog output range
High Limit
o.hi
Input value at high limit of the analog output range
Output Value
o.v
Relative value of the analog output
Output On Error
o.er
Analog output state in case of an error
Hold Time On Error
er.t
Duration of output-reaction hold in case of an error
Relay Output Link
r.lnk
Defines input linked to the relay output
Set Point
r.s.p
Set-point value of the relay output
Hysteresis
r.his
Relay output switching hysteresis
Direction
r.dir
Alarm action direction of the relay output
Calibration Parameter
Calibration Mode
cal
Defines the method of calibration
System Error
error
(1)
Depending on
Relay Output Link
value
(2)
Depending on
Analog
Output Link
value
(3)
Depending on
Temperature Unit
value
