Communicating
3
♦
Install standard FTDI Cable Driver
on your PC.
♦
Connect BCOT751 to the PC
via communication cable model K12U.
♦
Use an applicable terminal application
(e.g. HyperTerminal) and follow
the requirements of the described protocol
to communicate with the device.
Programming
Some parameters
are accessible only
when the respective
functionality is installed.
(see 'Specifications').
- Changing
Point Position
value
reflects on the real value
of all parameters
with the conductivity
measurement unit.
E.g.: changing
Point Position
value
from
0
to
1
would change
a set-point value
of 100 to 10.0.
Device parameters
BCOT751 is a programmable device whose
service behavior is determined by a set
of parameters. All the parameters, along
with their names, symbols, and value ranges,
are given in Table 1.
Parameter programming
BCOT751 is to be programmed
through the communication interface.
