BaseWall, Tel: +31-74-2491004, Fax: +31-74-2593934
45
VPN Configuration – Tunnel to Basewall Unit
•
VPN Tunnel List–
here you can add a new tunnel or change an existing one from the list The
router can setup a maximum of 50 tunnels.
•
Tunnel Name–
In order to distinguish the tunnels, you have to give the “Tunnel” a name..
•
Tunnel –
Only after you enable the tunnel check box, the tunnel can be connected.
•
WAN port –
You can choose WAN1, WAN2 or Any to make the VPN connection.
•
Local Security Network–
These entries identify the private network on this VPN router, the
hosts of which can use the LAN-to-LAN connection. You can choose a single IP address, the subnet,
or a selected IP range to make VPN LAN-to-LAN connection.
•
Remote Security Network–
These entries identify the private network on the remote peer VPN
router whose hosts can use the LAN-to-LAN connection. You can choose a single IP address, the subnet,
or a selected IP range to make VPN connection
•
Remote Security Gateway –
You can select the remote side IP address (WAN IP address) as your
remote side security gateway
•
Preshared Key –
Choose a shared secret for this entry, this must be the same on both units.
•
Action
Connect –
this button will initiate the tunnel
Submit Query
– this button will add the policy
VPN Configuration – Tunnel to BaseWall Client
