BaseWall, Tel: +31-74-2491004, Fax: +31-74-2593934
25
•
Reserve in DHCP
– Select
Enable
to reserve a particular (LAN) IP address for a
particular PC on your LAN. This allows the PC to use DHCP (Windows calls this
"obtain an IP address automatically") while having an IP address that never
changes.
•
Reserved IP Address
– Enter the IP address you wish to reserve, if the setting
above is
Enable
. Otherwise, ignore this field.
Host Network Binding
•
Binding WAN Port / Session
– Select
Enable
if you wish to associate this PC with
a particular PPPoE session. All traffic for that PC will then use the selected PPPoE
port and session.
•
Binding Method
– Suppose your PC is bound to WAN1 port, now you are selecting
“Strict Binding”. If WAN1 port is disconnected, your packets cannot go out through
other WAN port, if it is still alive. If you are selecting “Loose Binding” then when
WAN1 port is disconnected, your packets will automatically go to other WAN port, if
it is alive.
•
Select WAN Port / Select PPPoE session
– If the setting above is
Enable
, select
the desired Port and Session. Otherwise, ignore these settings.
•
Note
: Multiple PPPoE sessions are defined on the
Advanced PPPoE
screen.
Buttons
•
Add
– Use this to add a new entry to the database, using the data shown on
screen.
•
Delete
– Click this to delete the selected entry.
•
Update
– Use this to update the selected entry, after making the desired changes.
•
Reset
– Reverse any changes you have made since loading the data from the
Multi-WAN VPN Link Balancer.
Host & Group list –
This table shows the current binding.
