manualshive.com logo in svg

BaseWall Dual WAN VPN Firewall VPN 2000, Руководство пользователя, Страница: 16 / 76

Поделиться
Скачать
BaseWall Dual WAN VPN Firewall VPN 2000 Скачать руководство пользователя страница 16

 
 

 

BaseWall, Tel: +31-74-2491004, Fax: +31-74-2593934 

  

16

 

 

 

LAN IP Configuration: 

•

 

IP address - 

for the 

Dual WAN VPN Firewall

, as seen from the local LAN. Use the  

     default value unless the address is already in use or your LAN is using a different IP  
     address range. In the latter case, enter an unused IP Address from within the range used  
     by your LAN. 

•

 

Subnet Mask 

-The default value 255.255.255.0 is standard for small (class "C")  

     networks. For other networks, use the Subnet Mask for the LAN segment to which the  
      Dual WAN VPN Firewall

 

is attached (the same value as the PCs on that LAN. 

 

DHCP server configuration : 

•

 

DHCP Server Setup - 

If 

enabled, 

the Dual WAN VPN Firewall

 

will

 

allocate IP  

     Addresses to PCs (DHCP clients) on your LAN when they

 

start up. The default and  

     recommended value is "Enable". (Windowssystems, by default, act as DHCP clients. This  
     setting is called 

Obtain an

 

IP address automatically.)

 

•

 

DHCP Server Setup - 

If you are already using a DHCP Server, the

 

DHCP Server  

     setting must be 

disabled, 

and the existing DHCP server

 

must be set to provide the IP  

     address of the VPN Dual WAN VPN Firewall

 

as the 

Default Gateway

 

•

 

Client Lease Time – 

It is a certain period of time that a  DHCP server leases

 

an IP address  

     to a DHCP client.

 

 

DHCP IP address range 
 

•

 

Offered Range 

fields set the values used by the DHCP server when

 

allocating IP  

     Addresses to DHCP clients. This range also determines the

 

number of DHCP clients  

     supported.

 

•

 

Free Entries 

indicates how many DHCP entries are not currently

 

allocated, and still  

     available.

 

 
ARP Proxy 

   
Enable this ONLY if the LAN port has an IP address in the same address range as the 
WAN  port(s). This means that all PCs using this Gateway must have valid fixed 
external (Internet) IP addresses. If enabled, enter the IP address range used on your 
LAN. 

 

LAN Any IP Setup 

   

By default is disabled. If you enable “LAN any IP”, that means no matter what static IP 
address hold on the client (your PC). The clients do not need to 

change the IP 

address, even though it has different IP segment than LAN segment, it still can access 
Internet through NAT.  

 

 
 

Содержание Dual WAN VPN Firewall VPN 2000













































































Отзывы:

Нет отзывов