BaseWall, Tel: +31-74-2491004, Fax: +31-74-2593934
46
Tunnel to BaseWall Client –
This describes an IPSec tunnel from a the VPN 3000 to the BaseWall
Client Software.
•
VPN Tunnel List–
here you can add a new tunnel or change an existing one from the list The
router can setup a maximum of 50 tunnels
•
Tunnel Name–
In order to distinguish the tunnels, you have to give the “Tunnel” a name..
•
Tunnel –
Only after you enable the tunnel check box, the tunnel can be connected.
•
WAN port –
You can choose WAN1, WAN2 or Any to make the VPN connection
•
Local Security Network–
These entries identify the private network on this VPN router, the
hosts of which can use the LAN-to-LAN connection. You can choose a single IP address, the subnet,
or a selected IP range to make VPN LAN-to-LAN connection.
•
Distinguished name remote client –
Use for example an email address
•
Preshared key -
Choose a shared secret for this entry, this must be the same on both units.
•
Action
Connect –
this button will initiate the tunnel
Submit Query
– this button will add the policy
VPN Configuration – Advanced settings
When you use the
tunnel to BaseWall unit
or
tunnel to BaseWall client
configurations you don’t need
to use the
Advanced Settings.
Only when you want to make adjustments for a IPSec tunnel to a third
party unit you can choose here settings that may be required.
