BaseWall Dual WAN VPN Firewall VPN 2000 Скачать руководство пользователя страница 34

Страница: 34 / 76

BaseWall, Tel: +31-74-2491004, Fax: +31-74-2593934

Dynamic DNS Service

This pull-down menu can Enable/Disable the Dynamic DNS feature, and select the required
service provider.

•

Disable

– Dynamic DNS is not used.

•

TZO

– Select this to use the TZO service (www.tzo.com). You must configure the

TZO

section of this screen.

•

DynDNS

– Select this to use the standard service (from www.dyndns.org or other

provider). You must configure the

Standard Client

section of this screen.

•

3322(in China)

– This is available in China. It is similar to “DynDNS”

•

User Defined DDNS Server

– This is the user defined DDNS server. If the DDNS

other than TZO, dyndns.org and 3322.

Additional settings

These options are available if using the standard client.

•

Enable Wildcard

– If selected, traffic sent to sub-domains (of your Domain name)

will also be forwarded to you.

•

Enable backup MX

– If enabled, you must enter the

Mail Exchanger

address

below.

•

Mail Exchanger

– If the setting above is enabled, enter the address of the backup

Mail Exchanger.

WAN Port Binding

•

Select the WAN port used by the Dynamic DNS.

•

The "Force Update" button will update your record on the Dynamic DNS Server

immediately.

Содержание Dual WAN VPN Firewall VPN 2000













































































Результаты поиска

Содержание Dual WAN VPN Firewall VPN 2000

Отзывы:

Похожие инструкции для Dual WAN VPN Firewall VPN 2000

Бренды по названию

Популярные бренды

BaseWall Dual WAN VPN Firewall VPN 2000, Руководство пользователя

Результаты поиска

Содержание Dual WAN VPN Firewall VPN 2000

Отзывы:

Похожие инструкции для Dual WAN VPN Firewall VPN 2000

Бренды по названию

Популярные бренды