BaseWall Dual WAN VPN Firewall VPN 2000 Скачать руководство пользователя страница 63

Страница: 63 / 76

BaseWall, Tel: +31-74-2491004, Fax: +31-74-2593934

Data – NAT Status

LAN IP info

•

IP Address –

The LAN IP Address of the Dual WAN VPN Firewall.

•

Mask Address –

The Network Mask (Subnet Mask) for the IP Address

above.

Active WAN IP Info –

There is one (1) row for each active connection, for each connection the

following data is shown.

•

IP Address –

The WAN (Internet) IP Address of the VPN 800/2 Firewall Router.

•

Mask Address –

The Network Mask (Subnet Mask) for the IP Address.

NAT Timeouts –

This displays the current timeout values for TCP and UDP connections.

TCP Prosperity -

This displays the MSS (Maximum Segment Size) and Maximum

Windows size for TCP packets.

NAT Traffic -

This section displays statistics for both outgoing (LAN to Internet) and incoming

(Internet to local traffic.

NAT Connections -

This displays the current number of active connections. For further

details, click the "View Connection" list button.

Errors -

Statistics are displayed for Checksum errors, number of retries, and number of

bad packets.

Misc -

This displays the total IP packets and reserved address.

Interface Statistics -

This section displays cumulative statistics. Use the "Restart Counter" button

to restart these counters when required.

Содержание Dual WAN VPN Firewall VPN 2000













































































Результаты поиска

Содержание Dual WAN VPN Firewall VPN 2000

Отзывы:

BaseWall Dual WAN VPN Firewall VPN 2000, Руководство пользователя, Страница: 63 / 76

Результаты поиска

Содержание Dual WAN VPN Firewall VPN 2000

Отзывы: