16
Installation
2.
Position the power and
ground cables. Add cable
ferrules at the end of the
cables.
Cable Positioning
POWER VERSION (PWR)
1.
Remove Ex e lid and
insert cables into glands
Unscrew the 7 M6x1 fasteners
and remove the Ex e lid to
access the power and network
interfaces.
Follow the mounting instructions
of the cable glands thoroughly.
3.
Verify that the incoming
power cable is NOT
live using
a multimeter.
Connect power and ground
cables to the power and earth
terminals. For additional
earthing info, see page: 17.
Terminate cables
Follow the cabling and termination instructions below for correct installation. Lay out the parts,
cables and components as shown in the illustrations. It's recommended to use the included
dome fixture during the cabling and termination process.
Содержание Wireless X BPXWXU1
Страница 1: ...User Manual English BPXWXU1 revision 4...