11
Installation
4.
5.
Once properly aligned,
the fusion splicer uses an
electrical arc to melt the
fibers, permanently welding
the two fiber ends together.
Splicing fiber
A typical fusion splice has a
tensile strength of between
0.5 and 1.5 lbs. Using heat
shrink tubing, silicone gel
and/or mechanical crimp
protectors will keep the
splice protected from outside
elements and breakage.
Protection of the splice
6.
7.
Connect power and
ground
Verify that the incoming
powercable is NOT
live using a
multimeter.
Add cable ferrules. Connect power
and ground cables to the power
and earth terminals. For additional
earthing info, see page: 17
Mount fiber tray lid
Mount the small cover
protecting the splice, and then
the lid, protecting the entire
fiber tray.
Содержание Wireless X BPXWXU1
Страница 1: ...User Manual English BPXWXU1 revision 4...