Bartec BCS3600ex Series, Руководство пользователя

Страница: 92 / 174

Commissioning
BCS3600
ex
series
Hand-held scanner and accessories
84/164
Subject to technical changes.
April 2022 / Revision C
6.11.8 Data cable and power supply (Universal supply module to PC/Host)
Data line:
BARTEC recommends the use of the following cables:

Commercially available shielded data cable to avoid external interference into the
data cable e.g. min. CAT5 cable or other shielded cable to avoid external
interference into the data cable

The following core cross-sections and number of cores:
Interface
Recommended
wire cross section
Number of conductor
RS232
0,2 mm
2
to 2,5 mm
2
24 – 14 AWG
5
RS422 4
RS485 4
USB-SPP 4
This connection to the host PC is done by the customer.
No cables manufactured by BARTEC are used.
The connection is made by customer-specific cable connections.
Note for use of USB connection cables
The color assignment of the USB cables is not standardized.
Which colour is used for USB wires D+ and D- depends on the USB cable manufacturer.
Tip: Before wiring, measure the cable to know which wires are D+ and D-.
Connector Type A Socket connector Type A
Pin Color Signal
1 Red V
CC
5 V
DC
2 Grey Daten (D-)
3 Green Daten (D+)
4 Black Ground (GND)