Bartec BCS3600ex Series, Быстрый старт

Страница: 65 / 76

BCS3600
ex
series
Hand-held scanner and accessories
Faults – causes and
remedies
Subject to technical changes.
March 2021 / Revision B
59/68
8.1.1 Set Factory Default - Remove Custom Defaults (Reset to Factory Defaults)
Set Factory Default - Scan the "Set Factory Default" barcode below to remove all user-
defined defaults and reset the hand-held scanner to the factory defaults.
(For Factory Default, see the Zebra "Product Reference Guide" for the DS36X8. "Appendix
A, Standard Default Parameters")

Barcode “Set Factory Defaults” scanning
8.1.2 Write to Custom Defaults - Set user-defined default values
Setting custom default values is described in ZEBRA's Product Reference Guide
Write custom defaults
Custom defaults can be configured to set unique defaults for all parameters. After changing
all parameters to the desired values, scan the following Write to Custom Defaults barcode
to accept/save the new custom default setting.

Barcode “Write to Custom Defaults” scanning.