Bartec BCS3600ex Series, Быстрый старт

Страница: 58 / 76

Commissioning
BCS3600
ex
series
Hand-held scanner and accessories
52/68
Subject to technical changes.
March 2021 / Revision B
6.7.3 Terminal assignment Supply module Ex i
Terminal assignment for the installation of power supply cables and connection cables on
the host PC side.
The following interfaces are supported: USB-SPP und RS232
ATTENTION
The supply module can be destroyed if the terminals are incorrectly assigned!

Note the correct assignment of the terminals.
Terminal block
Possible marking
(depending on selected version and interface)
Terminal Marking
Input voltage range
USB-SPP RS232
X1 L L = 100 V
AC
bis 240 V
AC
±10% / 50/60 Hz
X2 N N = Neutral conductor
X3 + 24 V
DC
±10%
X4 – GND
Supported data interface
USB-SPP RS232
X5 – TxD
X6 Placing the shield
X7 GND GND
X8 Data+ (D+) -
X9 Data- (D-) -
X10 5 V 5 V
The wire mesh of the data cable must be inserted into the shield clamp and the mesh
must also be connected to terminal for the shield.
When using the USB-SPP interface, the ferrite core must be used.