Bartec BCS3600ex Series, Быстрый старт

Страница: 50 / 76

Commissioning
BCS3600
ex
series
Hand-held scanner and accessories
44/68
Subject to technical changes.
March 2021 / Revision B
6.4.4 Connecting the hand-held scanner to the base station (optional)
1. The Bluetooth hand-held scanner sends data to the base station. The base station
sends these data to a host PC. To exchange data / receive data, the base station
must be connected to the hand-held scanner via Bluetooth.
2. To connect the hand-held scanner to the base station, place the hand-held scanner
in the base station.
–or–
Scan the connection code (Pairing Barcode) on the base station.
If the display is illuminated in red, the transfer has failed.
If the status LEDs are lit up in green, the hand-held scanner is connected to the base
station.
6.4.5 Inserting and charging the battery in the battery charging station
DANGER
Non-approved battery charging station!

Only use the battery charging station that has been specified for the relevant
configuration by BARTEC.
Spark formation!

Only use the battery charging station outside the potentially explosive
atmosphere.
1.
Point the contacts of the battery upwards.
2.
Slide the battery underneath the edge of the LED indicator ledge of the 4-slot
charging station.
3.
Press the battery into the 4-slot charging station.

You can hear the battery click into place

LED on the 4-slot charging station flashes yellow, indicating the start of the charging
process.

Battery is charged.

LED on the 4-slot charging station flashes green, indicating the end of the charging
process.
Charging time:
Battery Type for Zone 2 / Div 2
4 slot battery charging station
Type: G7-A0Z0-0013
B7-A2Z0-0036 Up to 5 hours
Battery Type for Zone 1
4 slot battery charging station
Type: 17-A1Z0-0013
17-A1Z0-0012 Up to 8 hours