Operating Manual for 3D Printer BT1.2
3
1.
Introduction
This operating manual contains device technical data, data and instructions for its
assembly, as well as information concerning device operation and commissioning.
However, the manual could not fulfil its aim if its contents are not familiar to those
who operate and maintain the device.
It is the user and operator's responsibility to familiarise themselves properly with
these operating instructions before commencing work. It contains important
information on work safety and maintenance, and therefore must be considered
as part of the equipment. The device's fault-free, safe operation and also its service
life largely depends on its correct use and maintenance.
Any arbitrary changes made to this device without the manufacturer's permission
void the manufacturer from liability in relation to consequential damage or injury!
If you find it difficult to understand any information in this manual, contact the
device manufacturer. We recommend that you keep the original instructions safe.
When working, follow the safety instructions to avoid the risk of injury either to
yourself, or others around you.
These instructions are marked with the following safety warning symbols in
the operating instructions:
▪
CAUTION RISK TO HEALTH OR DAMAGE TO PROPERTY
▪
CRUCIAL INFORMATION FOR THE OPERATOR
▪
GENERAL INFORMATION FOR THE OPERATOR
▪
RISK OF HAND INJURY
▪
CAUTION HOT SURFACE