Operating Manual for 3D Printer BT1.2
14
Put the upper part of the frame on, put on the profile and check that the entire surface is seated correctly on both sides.
Tighten the 2 M4 bolts with T-nuts (both sides). Tighten the M3 bolts in the rod holder twice (both sides). Attach the corner
connector and tighten both M4 bolts with T-nuts
The cover with the power supply put on the vertical stand and the lower black console. Tighten the M4 bolt. Adjust the
upper power supply bracket height to the threaded hole and tighten the M3 bolt.
5
Loosen
these bolts
before
installing
the bracket.
6
corner connectors location
bracket height adjustment
