Baroness LM18GB, Руководство по эксплуатации для владельца

Страница: 55 / 81

Issue 1:
As the weight of the grass clippings in the
grass catcher increases and decreases it
has direct effect on the HOC.
The weight of the basket weighs the cutting
head down lowering the HOC, when the
basket is then emptied, the cutting head and
HOC both rise too.
Solution:
The grass catcher is supported on its own
roller and support arm.
This means the weight of grass clipping,
thatch, sand etc. in the grass catcher
increases it will have no impact on the
cutting head's set HOC.
The operator can confidently cut the green
with the same even cut from start to finish.
1 3
2
4fx8ud-002
IGCA (Independent Grass Catcher Arm)_002
1 IGCA
2 Mower
3 Grass catcher
Issue 2:
Operator error and rough usage of handle
causes the cutting height to fluctuate.
As the operator pushes to hard or forward on
the handle the cutting head can scalp, if the
operator pulls back or leans on the handle
the cutting head will lift or jump, changing the
HOC.
Solution:
The grass catcher and handle are linked
to eliminate movement of the cutting head
during mowing.
Adjusting the linking rod on the IGCA to
center the handle arms in the handle
adjusters keeps the cutting head's
pressure consistent and allows tolerance
for operator error.
4
3
4
6
1
2
5
4fx8ud-003
IGCA (Independent Grass Catcher Arm)_003
1 IGCA
2 Mower
3 Grass catcher
4 Handle
5 Linking rod
6 Handle adjuster
Handling Instructions
LM18GB
・
LM56GB/LM66TB
Handling Instructions
Page 5-31
Operation of Each Section