Baroness LM18GB, Руководство по эксплуатации для владельца

Страница: 30 / 81

Engine Oil
Inspection of Engine Oil
For details on handling the engine, please
refer to the Engine's Owner's Manual.
Important
Screw the oil level gauge firmly.
Stop the engine, wait for 10 to 20 minutes
for the engine to cool down, and then check
the oil level.
Position the machine so that the engine will
be level, then check the engine oil level
without screwing the oil level gauge into the
oil filling port.
1
2
gui678-016
Inspection of Engine Oil_001
1 Oil level gauge (Oil filling port)
2 Drain plug
The appropriate engine oil level should be
between the upper and lower limit lines on
the gauge.
1
2
3
bgmiun-015
Inspection of Engine Oil_002
1 Oil level gauge
2 Upper limit
3 Lower limit
1.
2.
3.
Supply of Engine Oil
For details on handling the engine, please
refer to the Engine's Owner's Manual.
Important
Do not supply too much engine oil. Otherwise,
the engine may be damaged.
Important
Do not mix different types of engine oil.
Important
Be sure to use engine oil that is classified as
API Service Grade SE or higher, with an SAE
Viscosity that is appropriate for the operating
environment (ambient temperature).
Important
Screw the oil level gauge firmly.
Remove the oil level gauge.
Through the oil filling port, supply new
engine oil until the engine oil reaches a
level in the upper limit lines on the oil level
gauge.
Screw the oil level gauge firmly.
1
2
gui678-016
Supply of Engine Oil_001
1 Oil level gauge (Oil filling port)
2 Drain plug
It will take a while for the supplied engine oil
to descend into the crank case.
Check the engine oil level again 5 to 10
minutes after filling the oil.
1.
2.
3.
4.
LM18GB
・
LM56GB/LM66TB
Handling Instructions
Page 5-6
Inspection Before Use