Baroness LM18GB, Руководство по эксплуатации для владельца

Страница: 26 / 81

Preparation for Use
Install the Handle
Put the handle pin on the left frame into the
hole at the left-side lower edge of the handle.
While pressing the right-side lower edge of
the handle inward, put the handle pin of the
right frame into the hole.
Secure the lower edges (slotted section of
the handle adjusters) of the right and left
sides of the handle to the rear frame stay
from the back with the bolts, conical spring
washers, and washers.
Step:2
2
5
8
7
6
4
3
1
gifnuq-001
Install the Handle_001
1 Left-side lower edge of handle
2 Right-side lower edge of handle
3 Handle pin (Right frame)
4 Handle pin (Left frame)
5 Handle adjuster
6 Bolt
7 Conical spring washer
8 Washer
1.
2.
3.
Connection of Engine Switch Cord
Warning
When the connection of the engine switch
cord is incomplete, the engine will not stop
even if the engine switch is operated.
Check that the cord is correctly connected.
When assembling the handle, check the
connection of the engine switch cord.
There are two connections - plug and crimp
terminal.
The plug is connected to the plug connected
to the engine.
The crimp terminal is secured to the engine
crankcase with a hexagon bolt.
2
1
eo4kem-001
Connection of Engine Switch Cord_001
1 Plug
2 Crimp terminal
1.
2.
LM18GB
・
LM56GB/LM66TB
Handling Instructions
Page 5-2
Preparation for Use