Baroness LM18GB, Руководство по эксплуатации для владельца

Страница: 42 / 81

Adjustment of Groomer
Note:
Depending on the specifications, this function
may not be available.
Important
Adjust the front groomer according to the
condition of the green before use.
Important
Set the grooming height more than 0.0 mm
from the ground.
If the groomer blades are set deeper than the
ground surface, the groomer shaft may break.
Important
The front groomer, when it is put too low, may
apply an excessive load to the engine and
transmission section and cause malfunction or
failure.
Important
When using the grooming brush, adjust the
height so that it will be equal to the cutting
height.
The brush will be worn easily when the height
is too low.
Set the slide caliper to the required cutting
height, adjust the neck position of the cutting
height screw of the cutting height gauge and
securely lock with a wingnut.
5
1
3
4
2
2qrq2r-002
Adjustment of Groomer_001
1.
1 Dethatching blade
2 Small screw for groomer
3 Cutting height gauge
4 Grooming height
5 Front roller
Loosen the nuts fixing the right and left
groomer adjustment screws.
Loosen the right and left special nuts A.
6 1
2
5
4
3
2qrq2r-003
Adjustment of Groomer_002
1 Groomer adjustment screw
2 Nut
3 Special nut A
4 Special nut B
5 Spring
6 Front groomer
Apply the cutting height gauge to the front
roller and the drum at the right and left edges
of the mower unit.
2.
3.
4.
LM18GB
・
LM56GB/LM66TB
Handling Instructions
Page 5-18
Adjustment Before Operating