Baroness GM2810A, Руководство по эксплуатации для владельца, Страница: 92 / 155

Loosen the water drain plug and air-
bleeding bolt to drain the water into the
container.
5
1
3
2
4
v1spa6-001
Draining of Water Separator_001
1 Float
2 Cup
3 Water drain plug
4 Element
5 Air-bleeding bolt
Tighten the water drain plug and air-
bleeding bolt.
Bleed air from the fuel system.
Cleaning of Water Separator
Important
If water contaminates the fuel, the supply
pump and injector will seize due to heat.
Clean the water separator in accordance with
the Maintenance Schedule.
However, when debris has accumulated in the
cup, clean it even before the schedule.
Follow the steps below to clean the water
separator.
Stop the engine, and then turn the key
switch to the "OFF" position.
Place a container under the water
separator.
[3]
[4]
[5]
1.
[1]
[2]
Remove and clean the cup, element and
float.
Replace the element with a new one
when replacement needed.
5
1
3
2
4
v1spa6-001
Cleaning of Water Separator_001
1 Float
2 Cup
3 Water drain plug
4 Element
5 Air-bleeding bolt
Install the cup, element and float in their
original positions.
Bleed air from the fuel system.
Fuel Filter
Inspection of Fuel Filter
The fuel filter works to remove foreign objects
mixed into the fuel.
When the fuel flow becomes insufficient,
replace the fuel filter if necessary.
Make sure that there is no fuel leakage.
Make sure that the fuel filter is not damaged
or dirty.
[3]
[4]
[5]
1.
2.
GM2810A
Handling Instructions
Page 5-14
Inspection and Cleaning