Baroness GM2810A, Руководство по эксплуатации для владельца, Страница: 69 / 155

Parked Regeneration
Danger Danger
Since it will become extremely hot around the
exhaust outlet during DPF regeneration, do
not perform the regeneration in a location
where fires may occur.
Important
When the system enters the level where DPF
regeneration is required, perform the
regeneration immediately.
Interrupting the regeneration or ignoring the
warning and continuing traveling or cutting
work may cause the engine and DPF to
malfunction.
Important
Parked regeneration can not be performed as
long as the DPF auto regeneration inhibit
switch set to the "Auto regeneration inhibit
mode".
Set it to the "Auto regeneration mode" to
perform regeneration.
Parked regeneration is the DPF regeneration
forcibly performed, parking this machine in a
safe location, when auto regeneration does
not reduce the amount of accumulated PM to
the specified value.
You can not continue to use this machine
for traveling and cutting work during DPF
regeneration.
You can operate this machine to perform
the regeneration. (The fault diagnostic tool
is not required.)
These are the conditions for activating
parked regeneration.
The parking brake is applied.
The traveling pedal is in neutral.
The throttle opening is 0% (idling).
Parked regeneration is activated when PM
accumulation level is "Level 1", "Level 2"
or "Level 3".
Important
If the regeneration remains uncompleted in
automatic regeneration, parked regeneration
is required with the blinking regeneration icon.
￭
･
･
･
1.
2.
3.
･
■
In PM accumulation "Level 1" or "Level 2":
Important
If ignoring the parked regeneration
requirement and continuing traveling or cutting
work in PM accumulation "Level 1" or "Level
2", PM accumulation level enters "Level 2" or
"Level 3".
Follow the steps below for parked
regeneration.
When PM accumulation level enters
"Level 1" or "Level 2", the blinking
regeneration icon appears.
When the DPF auto regeneration inhibit
switch set to the "Auto regeneration
mode":
1
65 C 55 %
2400 RPM 100 %
% SOOT ENG RPM
FUEL LEVEL COOL TEMP
xlfvcz-004
Parked Regeneration_001
1 Regeneration icon
When the DPF auto regeneration inhibit
switch set to the "Auto regeneration inhibit
mode":
65 C 40 %
2400 RPM 100 %
% SOOT
ENG RPM
FUEL LEVEL COOL TEMP
1
27gtuu-008
Parked Regeneration_002
1 Regeneration icon
Stop traveling and cutting work.
Park this machine in a safe location.
Apply the parking brake.
Set the throttle opening to 0% (idling).
1.
2.
3.
4.
5.
Description of Functions
GM2810A
Description of Functions
Page 4-33
Engine