POWER REQUIREMENTS
PAGE 2
2. BEFORE YOU BEGIN
The Cv3 is an alarm reporting unit with an embedded HSPA transceiver.
Included with this device are the following:
•
16 pin terminal block for wiring sensor inputs
•
16 pin terminal block for wiring relay outputs/radio/power
•
USB cable for PC programming
•
Programming software CD-ROM
•
SMA to TNC Antenna Adapter
May also include:
•
Carrier specific SIM Card
•
Dipole Antenna
System Requirements
The Cv3 is designed to operate on an HSPA network. In order to operate
on a wireless network, you will require an account with a local wireless
provider who will provide you with a Mobile Identification Number
(MIN).
Additionally, to program the Cv3 and the embedded transceiver, one of the
following is required:
•
Standard telephone set with DTMF keypad, or
•
Personal Computer with CD Drive and USB port running
Windows 2000/XP/7/Vista
Registering the Cellular Transceiver
To program the embedded cellular transceiver for use on the HSPA
network, you will need to obtain a phone number from your wireless
provider. You will need to give your wireless provider the following
information:
•
SIM Card Number – included in the accessory bag
•
Installed “home” location – establishes the local calling region
•
A billing contact name and address
SIM Card (19 or 20 digits)
___________________________
Phone Number (10 digits)
___________________________
Содержание B1277-HSPA
Страница 2: ......
Страница 36: ...TECHNICAL DRAWINGS PAGE 33 9 TECHNICAL DRAWINGS Unit Dimensions...