Barnett Engineering B1277-HSPA, Руководство по установке и эксплуатации

Страница: 29 / 45

OPERATIONS PAGE 26
7. OPERATIONS
This chapter gives a detailed description of exactly how the Cv3 will
operate after the start-up programming has been completed. Parameters
which may be altered are pointed out, with reference to the appropriate
Program Code section.
Alarm Sequence
When the B1277 detects an alarm condition, it dials the first telephone
number stored in the directory. When the telephone call is answered, the
B1277 will announce its Site ID, the list of any alarms present, and prompt
the user to “Enter Acknowledge Code”. It will repeat this message a
minimum of three times, pausing five seconds after each announcement to
wait for an acknowledgement. When the Acknowledge Code is detected,
The B1277 will announce “Alarms Acknowledged” and then prompt you
to “Enter Command Code”.
If the calling number is busy, if there is no answer, or if the B1277 does
not receive the Acknowledge Code after announcing the alarm, it will
terminate the call then call the next number in the directory. If the B1277
reaches the end of the directory without being acknowledged, it will wait
two minutes (
Directory Timer ) then start calling again beginning at the top
of the directory.
In addition to making voice calls, the B1277 may be programmed to
announce the alarms a number of times over radio, a public address
system, or send out a Text Message or email containing the alarm
information.
Acknowledging an Alarm
When the B1277 calls you on the telephone, it may take up to five seconds
before it starts speaking. After it announces the alarms, it prompts you to
“Enter Acknowledge Code”. You have five seconds to begin entering
digits.
If the B1277 has been programmed to operate its relays (
Output
Configuration ), you may send a relay code over the telephone before
acknowledging the alarms. The B1277 will actuate the relay, speak the
associated voice message, then prompt you again to “Enter Acknowledge
Code”. After the B1277 has detected the Acknowledge Code, it will speak
the phrase “Alarms Acknowledged” and return to the “Enter Command
Code” level. If no activity occurs for five seconds, it will hang up.
Appending the
#
digit at the end of the Acknowledge code allows you to