Barnett Engineering B1277-HSPA, Руководство по установке и эксплуатации

Страница: 4 / 45

INTRODUCTION PAGE 1
1. INTRODUCTION
The ProTalk Cv3, model B1277-HSPA, is a device used to monitor
sensors at an unattended site and provide scheduled reports or announce
alarm conditions over a cellular network and/or a two-way radio or public
address system. It is compatible with many temperature, humidity, and
fluid level sensors as well as smoke, fire, intrusion, and other discrete
sensors. The device also has four relay outputs that can be operated
automatically or manually (by using a remote telephone) for control of
external equipment.
Configuration of the ProTalk Cv3 can be accomplished using the
dedicated PC application. Additionally, limited programming can be done
using a local programming telephone or by remotely calling in to the unit.
When using either the local or a remote telephone to program the unit, the
unit prompts you step-by-step for database parameters using spoken
phrases and speaks back all the values you have entered.
The sections in this manual show the installation and operation of the
ProTalk Cv3, as well as instruction for programming the unit using the
keypad on your telephone or by downloading a database from an attached
computer.