Barnett Engineering B1277-HSPA, Руководство по установке и эксплуатации

Страница: 11 / 45

PROGRAMMING PAGE 8
5. PROGRAMMING
Programming With A PC
In order to program your Cv3 using a PC, you will need to install the
appropriate programming software. A complimentary copy of our
Windows-based software was included in the purchase of the product.
Simply insert the disk into your CD/DVD ROM drive, select Software
Installation from the CD Menu and follow the InstallShield
instructions. Be sure to keep the disk in the drive until your initial
programming is complete.
Once the installation of the programming software is complete, you
will need to connect your Cv3 to your PC. Two data connectors are
provided for programming and monitoring the Cv3: an RS232 port
using a DB9 male connector (requires a null modem cable – not
provided) and a USB type B connector. Do not use both at the same
time.
If you are using the USB connection, you will need to install the
drivers found on the installation CD. Select USB Driver Update from
the CD Menu. This will launch the USB driver application. Select the
B1277 Cv3 from the product list. Follow the onscreen instructions and
reboot the computer once the installation is complete.
Now that your software and drivers are installed, you are ready to
program your unit.
Simply double click the BE shortcut on your desktop or follow your
start menu to All Programs and select Barnett Engineering. This will
open up a generic folder containing information for all of our products.
You will find the Cv3 Configuration Software in the B1277 Cv3
folder. Select this executable and it will open the programming
software. Select the appropriate COM port to communicate with the
B1277 (eg. a USB COM port will have “(USB)” after the COM port
number. All information pertaining to the software can be found within
the Help files of the Cv3 Configuration Software.