Barko 830B, Руководство по обслуживанию

Страница: 166 / 218

60-32 ®
SERVICE- HYD PUMP T6, T7 VANE
(continued...)
4.
2.2 Pump Reassembly
Fit the cartridge (P2) into the housing. (see-
Fig-16)
Ÿ
If the cartridge is blocked at "1/2
parcours", rotate the shaft.
Ÿ
Position the shaft / front cap assy
only if the cartridge is well positioned,
dowel pin in the housing dowel pin
hole.
Ÿ
Put some grease on the seals to
prevent them from moving.
Ÿ
Always check if the shaft rotates
freely. If not, disassemble and go
back to the previous step.
Check if the dowel pin is in its position in the
housing by trying to rotate the cartridge.
Ÿ
If the cartridge does rotate, the dowel
pin is not in the hole. Take the car-
tridge out and try again.
(see Fig-17 for 5 & 6)
Assemble the end cap on the housing assy.
Fig-16
5.
6.
Fig-17
06/05/2019
Updated
SERVICE