Barko 830B, Руководство по обслуживанию

Страница: 140 / 218

60-6
®
CUMMINS TIER 4 DIESEL ENGINE
(continued...)
NOTICE
NOTICE
DIPSTICK
WATER SEPERATOR
ENGINE OIL FILL
OIL DRAIN
VALVE
OIL DRAIN PLUG OIL FILTER
3 ROUTINE MAINTENANCE PROCEDURES AS INSTALLED IN BARKO MACHINES
Because vendor components are installed in the BARKO factory and
modifications may have been made, refer to the following information IN
ADDITION to following the maintenance procedures in the vendor service
manuals.
3.1 Checking and Changing Engine Oil
Refer to your Cummins manual for engine oil recomendations and capacities.
3.1.1 Checking Engine Oil Level
1.
2.
Locate the Engine Oil Dip Stick. (Fig-1)
Ensure the oil level is between MIN and
MAX lines on the dip stick.
Ÿ
Add oil if low
Ÿ
Open the RH Engine Compartment Access
Door to gain access the engine
compartment.
3.1.2 Changing Engine Oil
1.
2.
Ÿ
remove cover to access drain (Fig-2)
Follow steps in Section 5 of your Cummins manual for changing the
Lubricating Oil and Filters.
Ÿ
Locate the Drain Valve
(Fig-2)
and open valve to drain.
Ÿ
This BARKO machine is equipped with a Drain Valve, and a Drain Line to
the Drain Plug to ease in the engine oil change process.
Ÿ
Remove the Drain Plug located on the underside of the platform below
the engine (Fig-3) .
Locate the Engine Oil Drain Valve (Fig-2), Oil Drain Plug (Fig-3), Oil Filter
(Fig-4) and Oil Fill (Fig-1) locations.
Fig-1
Fig-2
Fig-4
Fig-3
06/05/2019
Updated
SERVICE