Barko 830B, Руководство по обслуживанию

Страница: 164 / 218

60-30 ®
SERVICE- HYD PUMP T6, T7 VANE
(continued...)
1.
2.
2.2 Pump Reassembly
Check if the dowel pin is in its position in the
housing by trying to rotate the cartridge.
(Fig-12)
Ÿ
If the cartridge does rotate, the dowel
pin is not in the hole. Take the
cartridge out and try again.
Fit the cartridge (P1) into the housing.
A : Protective cone on the shaft assembly
Ÿ
If the shaft Ø is bigger than the shaft
seal Ø, please contact BARKO
Service.
B : Shaft as protective cone into
the front cap. Slightly rotate the shaft to
avoid the shaft seal lip(s) to be deteriorated.
Ÿ
Push on the external bearing "cage".
(see Fig-13 for A, B & C)
C : Retaining ring into the front cap.
Ÿ
To avoid damaging the shaft seal, do
not forget to put a protective cone on
the shaft.
Fig-13
Fig-12
A
B
C
06/05/2019
Updated
SERVICE