Barco TransForm A, Руководство пользователя

Страница: 125 / 202

5. Maintenance
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
_____________________________________________________________
5-2
5.1 Exchange of consumables
5.1.1 Replacing the filter pad of Processor
The filter pad of the P
ROCESSOR
has to be changed in intervals, depending on the grade of pollution of the air. The
air filter is located behind the ventilation slits [1] on the front of the P
ROCESSOR
; please refer to Figure 3-1 front view
of the Processor .
•
Unlock the front cover of the P
ROCESSOR
with the key!
•
Pull the handle of the filter mounting [2] into your direction!
•
Pull out the filter mounting to the right!
•
Remove the old filter pad!
•
Insert a new filter pad!
•
Insert the mounting into the P
ROCESSOR
until the handle engages!
•
Lock the front cover!
As long as the filter pad is not irreversibly blocked, cleaning it with a vacuum cleaner is also an
acceptable method to maintain good air ventilation within the system!
5.1.2 Replacing the filter pad of OmniBus A12 and Extender
The filter pads of O
MNI
B
US
A12 and E
XTENDER
devices have to be changed in intervals, depending on the grade of
pollution of the air. The air filter is located behind the
ventilation slits [1] on the front of the device; please refer
to Figure 3-7 Front view of OmniBus A12 and Figure 3-13 Front view of the Extender respectively.
•
Unlock the ventilation flap by turning its
lock [2] with the key and open it!
•
Remove the old filter pad!
•
Insert a new filter pad!
•
Turn the ventilation flap upwardly and close it by turning the
lock [2]!
As long as the filter pad is not irreversibly blocked, cleaning it with a vacuum cleaner is also an
acceptable method to maintain good air ventilation within the system!