6. Advanced configuration
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
_____________________________________________________________
6-7
Orbiting
With the
Orbiting
entry in the registry orbiting of the display can be started and the orbiting time can be de-
fined.
Name
Orbiting
Typ
DWORD
Value
0..FFFFFFFF
hex
Default
0
Effective
after one revolution or, starting from
0
, after rebooting
Table 6-9
Please, refer to section
3.5.2 Configuring the display driver
for more details (
Orbiting
).
PanelResolutionOnly
With the
PanelResolutionOnly
entry is determined if the AGX
G
RAPHIC
C
ARD
can only be operated with the
native resolution of the display device or if it could also be operated in a lower resolution. This setting applies to
digital displays only.
Name
PanelResolutionOnly
Typ
DWORD
Value
0
or
1
Default
0
Effective
after rebooting
Table 6-10
If value is set to 1 only the native resolution can be selected in the display properties dialog. This is also the case,
if the O
MNI
S
CALER
is used together with the graphic card. If value is 0, also lower resolution can be selected.
This option has no effect on the display properties of the UGX
G
RAPHIC
C
ARD
. It always uses the value 1 irrespective
of the selected value.
TransparentBlt
This option has no effect on the display properties of T
RANS
F
ORM
A.
WriteCombining
With the
WriteCombining
entry in the registry write combining can be enabled on CPUs with Pentium Pro,
Pentium II, Pentium III, Pentium IV or Celeron processor.
Name
WriteCombining
Typ
DWORD
Value
0
or
1
Default
1
Effective
after rebooting
Table 6-11
Write combining enables the CPU to transfer images to the graphical boards faster but may cause rendering er-
rors under rare conditions.
