Barco TransForm A, Руководство пользователя

Страница: 32 / 202

3. Getting started
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
____________________________________________________________
3-15
3.2 Cabling
3.2.1 Power supply
Check the power rating on your outlet before connecting the devices of T
RANS
F
ORM
A to the
wall outlet or to a power strip. Contact your facilities manager or a qualified electrician if
you are not sure what type of power is supplied to your building.
T
RANS
F
ORM
A is designed to operate with single-phase power systems having a grounded
neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of
power system.
To connect P
ROCESSOR
, O
MNI
B
US
devices or E
XTENDERS
to the power supply, follow these steps:
•
If using an O
MNI
B
US
with redundant power supply first connect an equipotential bondig conductor to the
connector [28] ( Figure 3-11 ) at an O
MNI
B
US
A18 and connector [26] ( Figure 3-8 ) at an O
MNI
B
US
A12 respectively.
•
Plug the female end of the power cords into the mains connections of each P
ROCESSOR
[25] ( Figure 3-5 ),
O
MNI
B
US
A12 [24], O
MNI
B
US
A18 [27] and E
XTENDER
[24] ( Figure 3-14 ) respectively.
Figure 3-16
Mains connection
•
Plug the male end of each power cord into a power outlet.
3.2.2 Mouse
The standard mouse is a USB optical mouse with a PS/2 adapter. Either plug it with its PS/2 adapter into the
PS/2 mouse jack [26] or plug USB connector into one of the USB jacks [28] of the P
ROCESSOR
.
Figure 3-17
mouse connection via PS/2 (left) and via USB (right)
3.2.3 Keyboard
The standard keyboard is a USB keyboard . Plug it into one of the USB jacks [28] of the P
ROCESSOR
.
Figure 3-18
keyboard connection via USB