Barco TransForm A, Руководство пользователя

Страница: 107 / 202

4. Operating
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
____________________________________________________________
4-27
Encoder
manufacturer – type
compression
algorythm IP
protocol Skip bytes
at start Skip bytes
at end Stream
protocol TCP PID
iMPath – i1000 mpeg2 UDP 0 0 auto OFF 0
iMPath – i4000 mpeg2 RTP/UDP 0 0 auto OFF 0
RTP or UDP has to be configured in accordance with the encoder configuration.
mpeg4 TCP 0 0 element. ON 0 IndigoVision – VideoBridge
TM
8000 881 / 8000 882
Use port 49500 for TCP; for each encoder the streaming port must be differ-
ent. TCP is enabled without sending a string.
The Barco Indigovision interface tool is required for the streaming!
mpeg4 RTP 0 0 auto OFF 0 IndigoVision –
VideoBridge
TM
8000 882
The Barco Indigovision interface tool is required for the streaming!
mjpeg UDP 0 0 auto OFF 0 JVC – VN-C655U
Software viewer is needed to start the multicast stream and for keep-alive.
LANACCESS – onSafe MPEG2 mpeg2 RTP 0 0 auto OFF 0
LANACCESS – onSafe MPEG4 mpeg4 - - - - OFF -
mjpeg UDP 0 0 auto OFF 0 Lenel – Network vido recorder
TCP is not enabled for the Streaming video card.
mpeg2 UDP 12 0 auto ON 0 Mavix – MediaRacer 100 /
MediaRacer 150
Multiple ports for TCP possible,
Startstring:
Mavix
mpeg4 UDP 12 0 auto ON 0 Mavix – MediaRacer 100 /
MediaRacer 150
Multiple ports for TCP possible,
Startstring:
Mavix
Mobotix – D10Di-FixDome / M22 mxpeg UDP 0 0 auto ON 0
Startstring:
Mobotix://GET /control/faststream.jpg?
ª
stream=MxPEG&fps=25.000 HTTP/1.0\n\n
Signaling method is HTTP, signaling is supported.
The stream is a unicast stream. Resolutions up to 1280×576 supported.
NiceVision (Fast Video Security) –
ENC 8M2
mpeg2 RTP 4 0 auto OFF 0
NiceVision – Recorder Pro mpeg4 RTP 0 0 auto OFF 0
Only CIF resolution, only I and P frames are used.
No successive Video Object Plane (VOP) start markers without data (used in
recorded streams);
Stream must be multicasted and always available on the network (no
stream setup signaling required).
mpeg2 RTP 0 0 auto OFF 0 Optelecom-NKF –
c15 / c20 / CS20
The Ethernet interfaces must be set to
Forced 100 Mbps Full Duplex
, when con-
necting to an NKF Switch.
Optibase – MGW3100 mpeg2 – – – auto OFF –
Path 1 – Cx 1800 mpeg2 UDP 0 0 auto OFF 0
Pelco – PelcoNet NET350 h263 RTP 0 0 auto OFF 0
I-frame distance may not be 0.
Pelco – PelcoNet NET4001A mpeg2 RTP 4 0 auto OFF 0
No on-board RCP+ support.