Barco MediCal Pro, Инструкция по установке и эксплуатации

Страница: 75 / 115

75
9 When the calibration is finished successfully, it displays the following
message:
Click on OK to close the window.
3.5 Setting up a Q/A task schedule
The tasks can be categorized in three groups, depending on the
impact they have on the user and the applications running on the viewing
station.
The task categories are:
To open the Q/A task setup window:
In the main window, click on the Q/A Setup... button. The Q/A Setup
window appears.
Transparent inter-
vention-free The task runs completely in background. It does not
require any action from the user and does not
change the image on the display. E.g., an Automatic
I-Guard Check on a BARCO Coronis display is such a
task.
These tasks can run also when no user is logged in
on the workstation.
Intervention-free The task does not require any action from the user
but does change the image on the display. E.g., the
Measure Quality Level of a BARCO Coronis display
runs completely automatic, but during the execution
of the task, the current application image is replaced
by test images necessary for the measurement.
These tasks can run only when a user is logged in on
the workstation.
Non-intervention-
free The task requires a user action. E.g., a visual check on
a test pattern requires the user to confirm that the
pattern was displayed correctly.
These tasks can run only when a user is logged in on
the workstation.