manualshive.com logo in svg

Barco MediCal Pro, Инструкция по установке и эксплуатации

Поделиться
Скачать
Barco MediCal Pro Скачать руководство пользователя страница 12

Introduction

12

1.4 The main window at start-up

MediCal Pro always starts in Standard user mode.
In Standard user mode, the main window consists of the Q/A Check 
section, allowing you to run and check Q/A tasks.

The Q/A Check section in the main window contains the following items:

•

Last Q/A check on: Here you find the date and time the last Q/A check 
was run. If no Q/A check was run yet (e.g., after installation), this will 
be listed as Unknown.

•

Result: Here you find the evaluated result of the last Q/A check.

Sometimes the Info symbol 

 is visible next to the result. When 

you move the mouse pointer over the symbol, a tooltip with more 
information pops up.

The following results are possible:

•

Today’s Q/A tasks: The number of Q/A tasks that are due for today 
and not have been executed yet.

•

Q/A Check... button: Click to execute the due Q/A tasks immediately.

OK:  

All Q/A tasks were OK, so the system is OK.

Not OK: 

At least one of the Q/A tasks failed. To see which task(s) 
failed, click on the Q/A Setup... button.

Skipped: 

The user decided not to run the Q/A check.

Unknown:  At least one of the Q/A tasks has not been run yet or the 

configuration has changed since the last Q/A check.

Содержание MediCal Pro




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды