Barco MediCal Pro, Инструкция по установке и эксплуатации

Страница: 15 / 115

Introduction 15
• If one or some of the displays you wish to control does not appear as
display icon, you need to run the configuration setup Wizard. This is
also the case after something has changed to the viewing station
(e.g., a display was removed or added).
Running the configuration setup Wizard can be done by clicking on the
Configuration Setup... button.
• If an optical sensor has been used for executing a certain task, the last
used sensor is depicted in the Configuration section.
• You can perform a number of actions to the displays when they are
listed in the Configuration section. Therefore, click with the right
mouse button on the icon of the display you want to perform an
action to. A menu with possible actions will pop up.