![background image](http://html.mh-extra.com/html/barco/mdsc-8255-mna/mdsc-8255-mna_user-manual_473706041.webp)
6. Important information
Possible cleaning solutions
•
250 ppm chlorine solution
•
NaCI solution 0.9% – Sodim chloride 00-236
•
Bacillol AF
•
1.6 percent aqueous ammonia
•
Cidex® (2.4 percent glutaraldehyde solution)
•
Sodium hypochlorite (bleach) 10 percent
•
“Green soap” (USP)
•
Like Cleansafe® optical cleaning liquid
•
Isopropanol
•
Haemosol solution (1% in 1 liter water)
•
Chlorehexidine 0,5% in 70% Ethanol
6.4.2
Battery replacement
To replace the battery of the remote control
When the display no longer responds to the remote control or its range seems to be reduced, it may be
time to replace the battery. Follow the steps below to replace the battery.
1. Insert a coin in the battery cover slot on the back of the remote control an turn it counterclockwise.
2. Remove the used battery and replace it with a new battery (CR2032) with the plus (+) symbol facing up.
3. Replace the cover and turn the cover slot clockwise until it locks into place.
Battery replacement should be done as depicted on the back side of the remote control.
Use a Lithium Battery CR2032 3V type.
C
AUTION
:
Replace with the correct battery type, there is risk of explosion if the battery
is replaced with an incorrect type.
K5902133 (451920612482) MDSC-8255 23/11/2017
39