![background image](http://html.mh-extra.com/html/barco/mdsc-8255-mna/mdsc-8255-mna_user-manual_473706037.webp)
6. Important information
Ventilation
Do not cover or block any ventilation openings in the cover of the set. When installing the device in a
cupboard or another enclosed location, heed the necessary space between the set and the sides of the
cupboard.
Installation
•
Place the equipment on a
fl
at, solid and stable surface that can support the weight of at least 3 units.
If you use an unstable cart or stand, the equipment may fall, causing serious injury to a child or adult,
and serious damage to the equipment.
•
Do not allow to climb or rest on the equipment.
•
When adjusting the angle of the equipment, move it slowly so as to prevent the equipment from moving
from or slipping off its stand or arm.
•
When the equipment is attached to an arm, do not use the equipment as a handle or grip in order to
move the equipment. Please refer to the instruction manual of the arm for instructions on how to move
the arm with the equipment.
•
Provide full attention to safety during installation, periodic maintenance and examination of this equip-
ment.
•
Suf
fi
cient expertise is required for installing this equipment, especially to determine the strength of the
wall, arm or ceiling suspension for withstanding the display’s weight. Be sure to entrust the attachment
of this equipment to the wall to a duly skilled technician and pay adequate attention to safety during
the installation and usage.
•
The manufacturer is not liable for any damage or injury caused by mishandling or improper installation.
Malfunctions
Disconnect the equipment’s power cord from the AC inlet and refer servicing to quali
fi
ed service techni-
cians under the following conditions:
•
If the power cord or plug is damaged or frayed.
•
If liquid has been spilled into the equipment.
•
If the equipment has been exposed to rain or water.
•
If the equipment does not operate normally when the operating instructions are followed. Adjust only
those controls that are covered by the operating instructions since improper adjustment of other con-
trols may result in damage and will often require extensive work by a quali
fi
ed technician to restore
the product to normal operation.
•
If the equipment has been dropped or the cabinet has been damaged.
•
If the product exhibits a distinct change in performance, indicating a need for service.
General warnings
•
All devices and complete setup must be tested and validated before taking into operation.
•
At end user application level it is necessary to foresee a backup unit in case the monitor fails.
Technical data
•
The monitor is intended for indoor use
•
The monitor has been designed to be used in landscape position
•
Class I Equipment, according to the type of protection against electric shock
•
The monitor is not intended to be sterilized
•
The monitor has no applied parts.
•
The enclosure has to be checked upon collision damage, refer to quali
fi
ed service personnel
This apparatus conforms to:
Medical Equipment:
K5902133 (451920612482) MDSC-8255 23/11/2017
35