5. Advanced operation
5.3.6
2
nd
Picture Source
About 2
nd
picture sources
The available 2
nd
picture sources for your display are:
•
DVI
•
SDI
Independent Transfer Function:
Gamma and Color temperature for the 2nd Picture Souce are always set to Native and
6500K independently from the Transfer Function applied to the Main Picture Source. For
a perfect visualization of a DICOM image please select the DICOM input signal as Main
picture and, if needed, the Video image as 2nd picture.
To select the 2
nd
picture source
1. Bring up the OSD main menu.
2. Navigate to the
Display Format
menu.
3. Enter the
2
nd
Picture Source
submenu.
4. Select one of the available 2
nd
picture sources and con
fi
rm.
5.4
Con
fi
guration menu
5.4.1
Information
About information
The available information items for your display are:
•
Model (commercial type identi
fi
cation)
•
Operating Hours (unit operation hours)
•
Main board release (hardware and
fi
rmware identi
fi
cation)
•
MNA release (
fi
rmware identi
fi
cation)
•
Eth1 Main (IP address of Main ethernet (1) port of the monitor)
•
Eth2 2nd (IP address of 2nd ethernet (2) port of the monitor)
•
SDI module release (hardware and
fi
rmware identi
fi
cation)
•
Serial Number (unit serial number)
•
Main FPGA release (
fi
rmware identi
fi
cation)
To access information
1. Bring up the OSD main menu.
2. Navigate to the
Con
fi
guration
menu.
3. Enter the
Information
submenu.
The different information items are shown.
5.4.2
Language
About languages
The available languages for your display OSD menu are:
28
K5902133 (451920612482) MDSC-8255 23/11/2017
